Hiduron 191 NES 835

Hiduron 191 NES 835 is a strong cupronickel alloy with elements of roughly 14.5% nickel and 4.5% manganese which is strengthened by additions of iron and aluminium. Hiduron 191 offers high strength along with higher anti-fouling characteristics and similar marine corrosion resistance to regular cupronickels, as well as higher toughness and tensile properties when compared to aluminium bronzes.

Hiduron 191 can be hot forged, has good weldability & machinability and can be thread rolled without difficulty.

West Special Fasteners are manufacturers of Incoloy Hiduron 191 NES 835 Fasteners.

Hiduron 191 NES 835 Fasteners such as Washers, Studbolts, Studs, Bolts, Nuts, Socket Capscrews, Socket Countersunk Screws, Socket Setscrews, hot forged items & machined components to drawings can all be produced at West Special Fasteners Limited.

We can also supply round bar in Hiduron 191 NES 835.

Hiduron 191 NES 835 is used for components that require high strength in a wide range of applications. This would include use for components such as fasteners, shafts, valve stems and flanges in subsea and surface naval vessels and offshore oil & gas platforms.

West Special Fasteners specialises in exotic metals and have supplied major UK companies with Hiduron 191 NES 835 Nuts, Bolts etc.

We look forward to helping with your Hiduron 191 NES 835 requirements and would welcome any enquiries by telephone on + 44 (0)1246 291111 or email sales@westspecialfasteners.co.uk.

Typical Chemical Analysis

C Si Mn P S Cr Ni Mo
0.050 0.150 3.5-5.5 0.010 0.150 0.50 13.5-16.5
W N2 Nb Ti Co Cu Al B
Balance 1.0-2.0
V Fe Mg Ta Nb + Ta Ca O2 Bi
0.70-1.20 0.050
Se Sn Zn Pb
0.100 0.200 0.020

Typical Mechanical Properties

Tensile Strength: 725N/mm² Min Impacts: 40 Izod Min
0.2% Proof Stress: 430N/mm² MIn
Elongation: 18% Stress Rupture:
Reduction of Area:
Other Remarks: